Differences

This shows you the differences between two versions of the page.

--- hardware:routerstationpro [2011/04/30 11:42] – [Copy rootfs on your SD card or USB disk] Michele Porelli
+++ hardware:routerstationpro [2012/09/04 16:18] (current) – external edit 127.0.0.1
@@ Line 8: / Line 8: @@
   * Subtarget is: Generic
   * Target Profile is: Ubiquiti RouterStation Pro
+  * (if you are using usb drive instead of sd card) Enter in "Kernel Configuration" and edit the device in "Default kernel command line" from sda1 to sdb1
   * (optional) make openwrt/menuconfig
   * (optional) make openwrt/kernel_menuconfig
@@ Line 38: / Line 39: @@
   * Target Profile is: Ubiquiti RouterStation Pro
   * make
-==== Re-enable LAN ports ====
-  * Install swconfig then:
-<code>swconfig dev eth1 set reset 1
-swconfig dev eth1 set enable_vlan 1
-swconfig dev eth1 vlan 0 set ports '0 1 2 3 4'
-swconfig dev eth1 set apply 1</code>
 ==== Flash firmware ====
   * Connect your computer to the WAN port
@@ Line 54: / Line 50: @@
 tftp> binary
 tftp> put openwrt-...-factory.bin</code>
+==== Re-enable LAN ports ====
+  * Install swconfig then:
+<code>swconfig dev eth1 set reset 1
+swconfig dev eth1 set enable_vlan 1
+swconfig dev eth1 vlan 0 set ports '0 1 2 3 4'
+swconfig dev eth1 set apply 1</code>
+==== Install wireless cards ====
+  * [[https://forum.openwrt.org/viewtopic.php?id=24682|How-To]]