Differences

This shows you the differences between two versions of the page.

--- hardware:routerstationpro [2012/01/31 10:28] – Michele Porelli
+++ hardware:routerstationpro [2012/01/31 10:32] (current) – Michele Porelli
@@ Line 39: / Line 39: @@
   * Target Profile is: Ubiquiti RouterStation Pro
   * make
-==== Re-enable LAN ports ====
-  * Install swconfig then:
-<code>swconfig dev eth1 set reset 1
-swconfig dev eth1 set enable_vlan 1
-swconfig dev eth1 vlan 0 set ports '0 1 2 3 4'
-swconfig dev eth1 set apply 1</code>
-==== Install wireless cards ====
-  * [[https://forum.openwrt.org/viewtopic.php?id=24682|How-To]]
 ==== Flash firmware ====
   * Connect your computer to the WAN port
@@ Line 57: / Line 50: @@
 tftp> binary
 tftp> put openwrt-...-factory.bin</code>
+==== Re-enable LAN ports ====
+  * Install swconfig then:
+<code>swconfig dev eth1 set reset 1
+swconfig dev eth1 set enable_vlan 1
+swconfig dev eth1 vlan 0 set ports '0 1 2 3 4'
+swconfig dev eth1 set apply 1</code>
+==== Install wireless cards ====
+  * [[https://forum.openwrt.org/viewtopic.php?id=24682|How-To]]