Differences

This shows you the differences between two versions of the page.

--- hardware:wbd-111 [2011/03/02 10:48] – Michele Porelli
+++ hardware:wbd-111 [2012/10/08 21:21] (current) – [Build OpenWRT] Michele Porelli
@@ Line 1: / Line 1: @@
-====== Wilibox wbd-111 - Teltonika RUT-1xx ======
+====== Wilibox wbd-111 - (Teltonika RUT-1xx base board) ======
 ===== OpenWRT =====
@@ Line 7: / Line 7: @@
 ==== Build OpenWRT ====
-      * download the latest trunk revision (you must use trunk because there are not a stable brach with gemini support):
+      * download the latest trunk revision (you must use trunk because there are not a stable branch with gemini support):
 <code>svn co svn://svn.openwrt.org/openwrt/trunk/</code>
@@ Line 14: / Line 14: @@
 ./scripts/feeds install -a</code>
-  * manually patch linux sources ([[https://dev.openwrt.org/attachment/ticket/6998/006-wbd111-enable-usb.patch]])
+  * <del>manually patch linux sources ([[https://dev.openwrt.org/attachment/ticket/6998/006-wbd111-enable-usb.patch]])
-<code>Open arch/arm/mach-gemini/board-wbd111.c and add the green line in the right position
+Open arch/arm/mach-gemini/board-wbd111.c and add the green line in the right position
-Open drivers/usb/host/ehci-hcd.c and replace the zero with one in the correct line
+Open drivers/usb/host/ehci-hcd.c and replace the zero with one in the correct line</del> - Fixed in r25820!
-</code>
-  * prepare your image (remember to select everythings you need):
+  * prepare your image (remember to select everything you need):
 <code>make menuconfig</code>
+Select as Target system: Cortina CS351x (StormSemi SL351x)
   * prepare your kernel (this step is uncommon, but it's indispensable for wbd-111):
 <code>make kernel_menuconfig</code>
-In this step you should include the right usb drivers but at this moment I don't remember exactly the name in the configurator, however the device is echi-fotg2xx. To check if you have selected the correct driver after flashing image
+In this step you should include the right usb drivers:
+<code>
+**Device Drivers --->**
+**USB support --->**
+Mark as "built in" (*) **Support for Host-side USB**
+Mark as "built in" (*) **EHCI HCD (USB 2.0) support**
+esc-esc esc-esc... save!
+</code>
+To check if you have selected the correct driver after flashing image
 <code>dmesg | grep -i ehci-fotg2xx</code>
@@ Line 45: / Line 54: @@
 <code>make -j 2</code>
-==== Add built-in hso comgt support (for Teltonika RUT-104) ====
+==== Teltonika RUT-104 ====
+=== Enable hso (3g modem) support ===
+  * Select hso module in make menuconfig:
+<code>
+**Kernel modules  --->**
+**USB Support  --->**
+Mark as "built in" (*) **kmod-usb-net**
+Mark as "built in" (*) **kmod-usb-net-hso**
+Mark as "built in" (*) **kmod-usb-serial**
+Mark as "built in" (*) **kmod-usb-serial-option**
+esc-esc esc-esc... save!
+</code>
+  * Select PCCARD Bus support in make kernel_menuconfig:
+<code>
+**Bus support  --->**
+Mark as "built in" (*) **PCI support**
+Mark as "built in" (*) **PCCard (PCMCIA/CardBus) support  --->**
+**PCCard (PCMCIA/CardBus) support  --->**
+Mark as "built in" (*) **32-bit CardBus support**
+esc-esc esc-esc... save!
+</code>
+=== Add built-in hso comgt support ===
   * Download and apply the patch to openwrt sources attached in [[https://dev.openwrt.org/ticket/6995|this ticket]].