Differences

This shows you the differences between two versions of the page.

--- software:riak [2014/02/05 13:38] – Michele Porelli
+++ software:riak [2014/02/05 17:45] (current) – [Setup an S3 clone with Debian] Michele Porelli
@@ Line 3: / Line 3: @@
 ==== Setup an S3 clone with Debian====
 This guide is tested on Debian Wheezy with Riak 1.4.4 in my (virtualized) servers
-  * All riak components should be installed on the same machine
+  * All riak components should be installed on the same machine (riak, riak-cs, riak-cs-control, stanchion)
   * Web application should be on a different machine or you have to use riak ip and port as proxy
   * Development outside the network is possibile but using the proxy as above
@@ Line 37: / Line 37: @@
 In progress...
+=== Riak-CS S3 Clone ===
+  - Add basho key<code># curl http://apt.basho.com/gpg/basho.apt.key | apt-key add -</code>
+  - Add basho repository<code>echo deb http://apt.basho.com $(lsb_release -sc) main > /etc/apt/sources.list</code>
+  - Install all riak components<code># apt-get install riak riak-cs stanchion riak-cs-control</code>
+  - Change riak backend to use riak-cs<code># nano /etc/riak/app.config</code><code>in riak_kv section comment (place two '%' at line start) the following line:
+{storage_backend, riak_kv_bitcask_backend},
+and replace it with:
+{add_paths, ["/usr/lib/riak-cs/lib/riak_cs-1.4.4/ebin"]},
+{storage_backend, riak_cs_kv_multi_backend},
+{multi_backend_prefix_list, [{<<"0b:">>, be_blocks}]},
+{multi_backend_default, be_default},
+{multi_backend, [
+  {be_default, riak_kv_eleveldb_backend, [
+    {max_open_files, 50},
+      {data_root, "/var/lib/riak/leveldb"}
+  ]},
+    {be_blocks, riak_kv_bitcask_backend, [
+      {data_root, "/var/lib/riak/bitcask"}
+  ]}
+]},</code><code>in riak_core section add:
+{default_bucket_props, [{allow_mult, true}]},
+</code>
+  - Increase riak capacity<code>/etc/riak/vm.args</code><code>## This setting is not present in default Riak installations, so
+## it should be added.  In some cases, a value of 128000 may be
+## appropriate.
++zdbbl 96000</code>
+  - Temporary enable admin user creation<code># nano /etc/riak-cs/ap.config</code><code>change {anonymous_user_creation, false} in {anonymous_user_creation, true}</code>
+  - Start riak, riak-cs and stanchion<code>riak start && riak-cs start && stanchion start && riak-cs-control start</code>
+  - Create an admin user<code>curl -H 'Content-Type: application/json' \
+  -X POST http://localhost:8080/riak-cs/user \
+  --data '{"email":"sysadmin@example.com", "name":"admin user"}'
+Take a note with the response!
+</code>
+  - Stop riak&co.<code>riak-cs-control stop ; stanchion stop ; riak-cs stop ; riak stop</code>
+  - Set riak-cs network ip<code># nano /etc/riak-cs/app.config</code><code>Change riak_ip value from localhost to your riak machine lan ip</code>
+  - admin-key and admin-secrets in riak-cs and stanchion
+  - set cs_root_host
+  - script
+  - ulimit
+=== Web server ===
+  - install nginx
+  - configure nginx server
+=== Firewall ===
+  - redirect rule